Lots for sale (I want to buy a lathe!!!)

Discuss, trade, swap, sell or buy stuff!
acloco
Senior Member
Posts: 1708
Joined: Mon Sep 25, 2006 8:53 pm
.204 Ruger Guns: 12FV, 12BVSS -S
Location: Nebraska

Lots for sale (I want to buy a lathe!!!)

Post by acloco »

I am going to buy a lathe so that I can venture into the gunsmith hobby a bit. NOT going in completely blind, I have a few years of automotive machining under my belt, so...cleaning out the extras bought for those other projects or stuff I just had to have.....

These items will be posted on 204 Ruger for a couple days before other websites. Everything is used, but excellent, or new in the box (NIB).

EMAIL me at acloco@yahoo.com if you want an item. Copy and paste the item # and include your shipping address. Everybody on here is good to go with a check. If I have not dealt with you in the past, I will not ship until the check clears. Money order equals same day or next day shipping.

ALL prices are shipped in the continental U.S.

1 - Hornady case trimmer (no pilots) NIB - $35
2 - Hornady Model M scale - NIB - $50
3 - Ohaus 10/10 scale - used, complete - $90
(new RCBS 10/10 sell for $145)
4 - Ohaus M5 (same as 10/10) - used, missing check weight - $70
5 - Caldwell Rock BR shooting rest with 3 different front bags and one rear bag-used $200
(front bags are $15-22 each)
6 - Forster CoAx case gauge -used- $60
7 - Redding Model 3 powder measure with micrometer adjuster & baffle - new - $100
8 - RCBS Uniflow - new - plastic tube has spots on it - $65
9 - Lyman Expert reloading kit - NEW!! - 6 hole turret press, Powder Measure, Case Trimmer, Powder scale, auto primer for press, lube pad, lube, etc, etc - NEW - $225
10 - RCBS Rock Chucker press - used - excellent - $100
11 - RCBS Rock Chucker press #2 - used - excellent - $100
12 - RCBS JR3 - used, excellent, with priming setup - $75
SPF! 12 - 300 + Remington 222 nickle cases - fired - nice condition - $35
13 - New Remington SPS stock, varmint contour, vent forend, dual front eyelets - $55
SOLD14 - HS Precision stock for Rem 700, short action, BDL- black, dark green web - varmint contour - $200 SOLD!
15 - NEW - 2000 Lapua 223 brass (Dakota headstamp) - $45/100, $215/500, $400/1000 shipped
16 - Bushnell 6x32 scope - Made in Japan - $65
17 - RCBS 50 Action Express dies - used, excellent - $25
SPF! 18 - Remington 700 BDL short action, stainless bottom metal, box, follower & spring, & action bolts - 243/308 size - $65
19 - Remington 700 blue trigger assy - no safety components - $35
20 - Remington 700 stainless trigger assy, with safety components - $55
21 - Bausch & Lomb Balfor A scope (adjust L/R & U/D with rings/bases - not included) - two marks on tube, fine cross hairs - $50
21 - RCBS Little Dandy powder measure with 26 powder rotors (#1-26) - NEW! -$225
22 - Dillon 550B - used, excellent - just back from Dillon tuneup - comes with 45 ACP conversion, Dillon 45 ACP dies, Dillon primer flipper, Dillon wrench, Dillon cover, Dillon video - $450
23 - Remington 700 in 17 Remington. Factory engraved receiver/etc and factory checkered stock. Have 600+ 1x fired brass, 2000 + bullets, dies, etc.....$1200 shipped to your FFL in the U.S. I have two spare barrels if interested - one is a heavy sporter and the other is a varmint contour (these are extra $).
24 - 1000 Winchester commercial cases. 1X fired, polished, FL sized, trimmed, chamferred, deburred, inside flash hole debur, priming pocket finished, and primed with Winchester small rifle primers - $350 shipped via UPS ground in the continental U.S. (yeah....ton of labor involved....ready to load!!)
Last edited by acloco on Thu Dec 27, 2007 11:10 pm, edited 4 times in total.
Bad Dad
Junior Member
Posts: 64
Joined: Mon Nov 27, 2006 11:55 am
Location: Colorado Springs

Re: Lots for sale (I want to buy a lathe!!!)

Post by Bad Dad »

acloco,
PM sent
"Bad Dad" Given to me by my 8 year old son after watching a 60's movie were I had to explain “BAD” as being “Awesome, Sweet, Rad":cool: . Love that kid
acloco
Senior Member
Posts: 1708
Joined: Mon Sep 25, 2006 8:53 pm
.204 Ruger Guns: 12FV, 12BVSS -S
Location: Nebraska

Re: Lots for sale (I want to buy a lathe!!!)

Post by acloco »

BD - back at ya.

My daughter is travelling back tonight...free shipping for you....last for another couple hours! :)
Lee C.
Senior Member
Posts: 356
Joined: Fri Apr 21, 2006 12:00 am
Location: antigo wisconsin
Contact:

Re: Lots for sale (I want to buy a lathe!!!)

Post by Lee C. »

acloco, I really would like to take you up on that rem. 17 you have. But I only have a week. And i'll be off for the rest of the winter so i'l have to pass on it. But good luck on your gunsmith venture any ways. Lee
WrzWaldo
Senior Member
Posts: 745
Joined: Mon Dec 18, 2006 10:34 am
.204 Ruger Guns: Remington XR-100 / Savage-Douglas-Richards

Re: Lots for sale (I want to buy a lathe!!!)

Post by WrzWaldo »

acloco
Senior Member
Posts: 1708
Joined: Mon Sep 25, 2006 8:53 pm
.204 Ruger Guns: 12FV, 12BVSS -S
Location: Nebraska

Re: Lots for sale (I want to buy a lathe!!!)

Post by acloco »

Lee - I hear ya!

WRZ - back at you. Will send tomorrow (Friday).
WrzWaldo
Senior Member
Posts: 745
Joined: Mon Dec 18, 2006 10:34 am
.204 Ruger Guns: Remington XR-100 / Savage-Douglas-Richards

Re: Lots for sale (I want to buy a lathe!!!)

Post by WrzWaldo »

Hey how much of this stuff you got left?

The transaction on the stock went extremely smooth! A+
acloco
Senior Member
Posts: 1708
Joined: Mon Sep 25, 2006 8:53 pm
.204 Ruger Guns: 12FV, 12BVSS -S
Location: Nebraska

Re: Lots for sale (I want to buy a lathe!!!)

Post by acloco »

EMAIL me at acloco@yahoo.com if you want an item. Copy and paste the item # and include your shipping address. Everybody on here is good to go with a check. If I have not dealt with you in the past, I will not ship until the check clears. Money order equals same day or next day shipping.

ALL prices are shipped in the continental U.S.

Items left...
1 - Hornady case trimmer (no pilots) NIB - $35
2 - Hornady Model M scale - NIB - $50
4 - Ohaus M5 (same as 10/10) - used, missing check weight - $70
5 - Caldwell Rock BR shooting rest with 3 different front bags and one rear bag-used $200
(front bags are $15-22 each)
7 - Redding Model 3 powder measure with micrometer adjuster & baffle - new - $100
8 - RCBS Uniflow - new - plastic tube has spots on it - $65
10 - RCBS Rock Chucker press - used - excellent - $100
21 - Bausch & Lomb Balfor A scope (adjust L/R & U/D with rings/bases - not included) - two marks on tube, fine cross hairs - $50
21 - RCBS Little Dandy powder measure with 26 powder rotors (#1-26) - NEW! -$225
23 - Remington 700 in 17 Remington. Factory engraved receiver/etc and factory checkered stock. Have 600+ 1x fired brass, 2000 + bullets, dies, etc.....$1200 shipped to your FFL in the U.S. I have two spare barrels if interested - one is a heavy sporter and the other is a varmint contour (these are extra $).
Post Reply