SmallCaliberCentral

Ive decided on these rings was just after some advice on which style to get

http://www.burrisoptics.com/sigrings.html

The universal ( I guess there pretty standard)

The double dove tail

The zee (weaver style)

also which base (for rem 700) would u recommend for your recommended above choice?

Thanks for you time.

Boomer

The turn in rings are the universal,with the rear being wndage adjustable,via the opposing screws in the base.Burris and Leupld bases are interchangeable.The Z rings work on the slotted bases like weaver etc.

Sorry i know the difference between them just was chasing what u use and preferred?

I use both.I prefer the ones with adjustable windage bases,one piece or two piece.

Since the 204 has almost no recoil, it does not make much difference. I like the Burris bases as they are steel and of good quality. I put the Burris Signature rings on my rifles as well.

+1 on the Zee rings. The inserts allow windage/elevation adjustment w/o using up internal adjustment.

I went with the Burris Xtreme tactical rings and an EGU picatiny base. It allows for a lot of adjustment and seems to be very solid, even though, like mentioned earlier, the .204 recoil is negligible.

I like the Double Dovetails (Leupold call the Dual Dovetail). Even though recoil not an issue with 204 as others have said - no windage screw to work loose ever. They also look neat and clean - if that matters to you.

I have the "universal" on 3 scopes; I love the way they fit (and don't scratch the scope either).