Burris Signature Rings?

Discussion about rifle scopes, spotting scopes and binoculars.
User avatar
boomer84
Senior Member
Posts: 113
Joined: Tue Apr 12, 2011 7:10 am
.204 Ruger Guns: remington 700 sps varmint
Location: WA, Australia

Burris Signature Rings?

Post by boomer84 »

Ive decided on these rings was just after some advice on which style to get

http://www.burrisoptics.com/sigrings.html

The universal ( I guess there pretty standard)

The double dove tail

The zee (weaver style)

also which base (for rem 700) would u recommend for your recommended above choice?

Thanks for you time.

Boomer
User avatar
Joe O
Senior Member
Posts: 449
Joined: Sat Jan 09, 2010 6:20 pm
.204 Ruger Guns: Savage LRPV,Ruger K1V,G2 Contender
Location: Upstate SC

Re: Burris Signature Rings?

Post by Joe O »

The turn in rings are the universal,with the rear being wndage adjustable,via the opposing screws in the base.Burris and Leupld bases are interchangeable.The Z rings work on the slotted bases like weaver etc.
User avatar
boomer84
Senior Member
Posts: 113
Joined: Tue Apr 12, 2011 7:10 am
.204 Ruger Guns: remington 700 sps varmint
Location: WA, Australia

Re: Burris Signature Rings?

Post by boomer84 »

Sorry i know the difference between them just was chasing what u use and preferred?
User avatar
Joe O
Senior Member
Posts: 449
Joined: Sat Jan 09, 2010 6:20 pm
.204 Ruger Guns: Savage LRPV,Ruger K1V,G2 Contender
Location: Upstate SC

Re: Burris Signature Rings?

Post by Joe O »

I use both.I prefer the ones with adjustable windage bases,one piece or two piece.
User avatar
Sidewinderwa
Senior Member
Posts: 648
Joined: Mon Dec 26, 2005 9:39 am
.204 Ruger Guns: Savages
Location: Washington state

Re: Burris Signature Rings?

Post by Sidewinderwa »

Since the 204 has almost no recoil, it does not make much difference. I like the Burris bases as they are steel and of good quality. I put the Burris Signature rings on my rifles as well.
Image
Please, no Sidewinder today!
User avatar
GaCop
Senior Member
Posts: 117
Joined: Tue Mar 24, 2009 12:53 pm
.204 Ruger Guns: AR-15, 24" stainless varmint barrel
Location: Warner Robins, Ga

Re: Burris Signature Rings?

Post by GaCop »

+1 on the Zee rings. The inserts allow windage/elevation adjustment w/o using up internal adjustment.
sharptailhunter
Senior Member
Posts: 137
Joined: Mon Jan 31, 2011 8:26 am
.204 Ruger Guns: Savage Model 12FV
Location: Southeast Idaho

Re: Burris Signature Rings?

Post by sharptailhunter »

I went with the Burris Xtreme tactical rings and an EGU picatiny base. It allows for a lot of adjustment and seems to be very solid, even though, like mentioned earlier, the .204 recoil is negligible.
m239
New Member
Posts: 18
Joined: Fri Mar 02, 2007 1:14 pm
Location: Australia

Re: Burris Signature Rings?

Post by m239 »

I like the Double Dovetails (Leupold call the Dual Dovetail). Even though recoil not an issue with 204 as others have said - no windage screw to work loose ever. They also look neat and clean - if that matters to you.
User avatar
Arizona Hunter
Senior Member
Posts: 137
Joined: Fri May 11, 2007 9:03 am
Location: Phoenix, AZ

Re: Burris Signature Rings?

Post by Arizona Hunter »

I have the "universal" on 3 scopes; I love the way they fit (and don't scratch the scope either).
Post Reply