I have a Remington VSSF II in .204 Ruger and just bought a used older Burris and was wondering if I would be able to use Burris Signature rings, or will I need extension bases/rings?
Well first welcome to the forum and don't worry about the shooters in here. Some of us are a little bit off but for the most part we are pretty good bunch shooters. Now as far as your question you should be fine with a regular set of bases and rings. Just look out for your ring height as your objective is going to be larger than 40mm. You might need a set of high rings. Good luck and good shooting. Ride Up!!!
RIDE UP!!! Savage LRPV .204 With a Burris 6.5x20 Mill Dot
And alot of other savage rat killers
While not the exact same scope,,, I bought a used Burris Black Diamond 8-32x (30mm) for use on my Remington 700 Tactical and called Burris... They gave me the Signature Rings and Inserts description for the application...I even got them at a little less cost than most retailers were asking...
OldTurtle wrote:While not the exact same scope,,, I bought a used Burris Black Diamond 8-32x (30mm) for use on my Remington 700 Tactical and called Burris... They gave me the Signature Rings and Inserts description for the application...I even got them at a little less cost than most retailers were asking...
Old Turtle
That's kind of a cute looking rig you got there. I like it!
Thank You... She's really accurate with some 60gr loads,,,certainly less that 1 MoA at 200yds...Unfortunately it has one of the older 1/12 twist barrels, rather than the newer 1/9 that would allow me to use a little heavier bullet...But that may change in the future...