Lens care

Discussion about rifle scopes, spotting scopes and binoculars.
WHISTLEPIG
Senior Member
Posts: 281
Joined: Sat Feb 18, 2006 8:09 am
Location: s. w. Idaho

Lens care

Post by WHISTLEPIG »

I read a thread here by Rick that mentioned scope covers and field dust that got me thinking about lens care. There is more than one way to skin a squirrel so I thought I would write up how I care for my optics and see if I could learn anything from all of you guys. I’m sure with all the money collectively invested in optics by the members here some good thoughts are floating around out there on this matter.

I’ve ruined a few scope lenses. The two Leupold VX II 3x9’s on top of my .270 and .338 are trashed. Years of deer and elk hunting in the intermountain northwest forests didn’t help. Scope covers are not for the woods. No cover releases fast or quiet enough to not interfere with that one shot everyone is looking for. You just have to be ready to wipe the lenses free of fog and rain. Stuffing the right hand sleeve of my jacket with ten or twelve cotton cloths cut especially to wipe scope lenses was a mandatory pre dawn ritual in camp. Wipe the lens, check it, wipe it again, and on and on to the ultimate result: A scratched lens. There is just no getting around it. Anti fog works a little for a while but it’s not the answer. Seeing through the scope at the right moment is way more important than preserving a scope for prosperity. You can get a lens replaced. You may never replace a fumbled shot at an animal.

A squirrel scope does not have the same environmental problems as the antlered game scope. No rain or fog, no freezing temperatures to fog an ocular lens. The enemy here is dust and dirt. There is no reason to ruin a colony varmint scope lens. Proper care will make it last like new indefinitely.My squirrel areas are a dust nightmare. Guns, scopes, binoculars, glasses, and range finder all covered with a fine layer of dirt. Here is what I do to maintain my optics.

The dirt has to come off somehow. It’s the how that makes the difference between scratched or not. If a dirty lens is rubbed with or without liquid lens cleaner the dirt is acting like an abrasive. With a pair of eye glasses this is taken care of with a trip under the faucet to flush off the dirt particles prior to cleaning. A trip under the faucet is not in the program for my rifles, so compressed air is used to purge the dirt away. A stop by the compressor on the way inside the house after a trip to the field makes short work of dust covered rifles and optics. I use eye glass cleaner and clean white cotton cloth to clean the inevitable smudge or finger print. Prior to cleaning the lens, a Q-Tip is run around the inside of the scope openings to remove any stuck on dirt from threads and scope tube recesses that could be transferred to the lens while wet cleaning and cause a scratch. There will always be a bit of lint from the cotton cloth. A camel hair artists brush is perfect for dusting this off; a trick from the camera bag. I do not wet clean the lenses unless they need to be cleaned. Same deal as cleaning a barrel to death. A visual check with a strong light or flash light will really show up any smudges.

Canned air is a great in the field fix for a dusty lens. A can and the artists brush are always in my shooting bag when blasting rodents or at the range. The can needs to be held vertically and shot in quick, short bursts to prevent expelling propellant with the air. Rap the brush a few times after using to knock out any dust collected in the bristles. A cigar tube or a long, narrow plastic parts bag are good container choices for the brush. It needs to stay clean.

Image

I’m a big believer in threaded lens covers. When not in the field my scopes have them on. I have no idea how dust gets into a gun safe but it does. Gun cases are another less than clean living space for an uncovered scope. Better have those lenses covered when cleaning. A drop of copper remover or the spray floating in the air while using a bore brush will eat the coating off a lens faster than it can be wiped off. Oil or cleaner on the lens also necessitates repeated and unnecessary wet cleaning to remove.

This cleaning regimen has kept my target and varmint scope lenses and other optics in tip top shape.
Guy M
Senior Member
Posts: 405
Joined: Sun Mar 11, 2007 11:58 am
Location: Washington state

Post by Guy M »

Good tips. I like those little "lens pens" sold in most gunshops. Easy to just stick it in your pocket. Also am a big believer in lens caps - have the Butler Creek flip-up jobs on most of my rifles, and the threaded screw in type on one scope.

Completely understand about not wanting to use the covers while big game hunting, but I do anyway. It seems to help. There are of course drawbacks to everything. I don't recall ever having the scope lens cap be a problem when I needed to make a shot at deer or elk though.

The canned air looks like a great solution for dusty conditions in the varmint fields!

Regards, Guy
skipper
Moderator
Posts: 1404
Joined: Thu Feb 09, 2006 3:32 am
.204 Ruger Guns: Remington XR 100, Custom build Lilja/Panda/Shehane/Jewell
Location: Cypress, TX

Post by skipper »

I've always tried to remove all the dust I can before going after the lens with lens tissue. I use compressed air to blow all the dust off that I can. Then I use a lens brush to dislodge the remaining big chunks and more air. Then I drop some lens cleaner on the lens and vacuum it off with a ear cleaning bulb until I can't detect any more dust/dirt. Now I use lens cleaner still remaining and lens tissue. I keep the pressure to a minimum. Anything that touches the lens will remove the coating. I think that the key is to clean your lens only when absolutely necessary; even to the point of looking through a slightly dirty lens.

I'm an avid stargazer. I have an Celestron Ultima 8 in. Schmidt-Casseograin that I have owned for almost twenty years now. I use a hair dryer to defog the lens in winter time about every fifteen minutes of viewing. Lenses are the most expensive part of any optics and deserve the utmost care. Any friction on a lens results in a loss of coating. The coatings are what makes all the colors focus on the same plane. Don't remove the lens cover until absolutely necessary. Then replace it as soon as possible. Don't look at the lens to determine if it is dirty, look through it. If you can't tell if it is dirty by looking through it, leave it alone. If you look at it you will almost always determine that it's dirty.
Image Hold 'em & Squeeze 'em
User avatar
Arizona Hunter
Senior Member
Posts: 137
Joined: Fri May 11, 2007 9:03 am
Location: Phoenix, AZ

Post by Arizona Hunter »

On my favorite big game rifle I have the clear, see through lens covers. They can be flipped up, but I normally leave them down and shoot just fine.

Canned air, like you mentioned is great for lens care. And when that is not available I either put water on the lens or at least a lot of breath to fog it over, then whipe it with cotton or polyester cloth or shirt.

Never ever use toilet paper or napkins, thats like using wood.

For my coyote rifle and my p-dog rifle I just use the Bushnell black cover that came with the scopes because I know I won't be using the gun until I'm in position.
Post Reply