Page 1 of 1
20 VT case forming question.
Posted: Sun May 15, 2011 9:05 pm
by GlennGTR1
Simple question, how difficult is it to form cases from the fireball? I have reloaded for about three years now for standard cartridges but havent done any wildcating.
Re: 20 VT case forming question.
Posted: Mon May 16, 2011 6:23 am
by jlc204
I read post wrong. sorry
Re: 20 VT case forming question.
Posted: Mon May 16, 2011 6:58 am
by wirelessguy2005
In the past i have used 221 fireball brass to make my 20 vt cases. Recently i started using 17 fireball brass to make my 20 vt cases and i like using is much more. In my opinion its easier to size the 17 FB brass up to 20 VT than it is to size the 221 brass down. All thats required to make 20 VT brass is simply run 221 fireball or 17 fireball brass thru the 20 VT full length sizer. PM me if you have any questions and i would be happy to answer them.
Brad