SmallCaliberCentral

i put my brass in the tumbler with walnut and some lyman brass polish . when there all done polishing they have a film of polish on them that i have ti wipe off . did i put to much polish in with the walnut shell ? do you guys us polish in your tumblers or not?
icebox

Switch to corncob media and NU Finish car wax.....your problems will go away.

Those guys from Nebraska are always pushing corn!

Some Walnut media will leave a lot of dust inside and outside of the case. After polishing my brass with W.M. I dump the media into a storage bucket and refill the polisher with corncob media sans polish for the final cleaning. YMMV

I use lyman crushed walnut as well, my solution, wash your brass in hot soapy water and let air dry for a few days. Then work your cases as usuall. Works for me. I have founf the walnut does a much better job of actaully putting a shine back on my cases.

Hate that red rouge film in the headstamp and extractor groove. I use this stuff, it doesn't leave any film. http://www.sinclairintl.com/product/819 ... -Additives

Or this stuff http://www.midwayusa.com/viewProduct/?p ... ber=541305 which works well.