casting alloy

Ask questions and share information about reloading.
User avatar
BitterClinger
New Member
Posts: 30
Joined: Tue Feb 20, 2018 8:36 pm
.204 Ruger Guns: Savage M12 LRPV

casting alloy

Post by BitterClinger »

This has absolutely nothing to do with the 204, but since I don't know anyone that reloads that doesn't also load for pistols too I figured, why not ask?

My question is this .. Is it possible to incorporate graphite powder into my alloy to make self lubing bullets? Recently, I was given a gallon size ziplock baggie full of powdered graphite and am trying to find a use for it.. If not in the lead itself, I figured to mix it in with the liquid alox.
User avatar
Rick in Oregon
Moderator
Posts: 4942
Joined: Thu Dec 01, 2005 4:20 pm
.204 Ruger Guns: Sako 75V, Cooper MTV, Kimber 84M, Cust M700 11 Twist
Location: High Desert of Central Oregon
Contact:

Re: casting alloy

Post by Rick in Oregon »

I cast all my pistol and revolver bullets, and use Rooster Red lube or Javlina. You may be able to tumble the slugs in that graphite, but I'm not sure how much of the stuff will adhere to the bullets.

When I plate rifle bullets with WS2, I use a RCBS rotary tumbler with 3/16" burnishing balls (bearings), but I'm not sure how impact plating would affect lead alloy bullets; guess you have to try to find out. Let us know if it works or not.
Semper Fortis
Rick in Oregon
NRA Life/OHA/VHA/VVA

Oregon, East of the Cascades - Where Common Sense Still Prevails

Image
foxtrotter
New Member
Posts: 1
Joined: Sun Aug 26, 2018 8:38 pm
.204 Ruger Guns: Savage FV-12

Re: casting alloy

Post by foxtrotter »

Post Reply