223AI loads (75gr Amax and 65gr Gamekings)

Ask questions and share information about reloading.
User avatar
ACLakey
Senior Member
Posts: 108
Joined: Thu Dec 27, 2007 7:06 pm
.204 Ruger Guns: Savage .204 Predator Hunter(soon)
Location: So. Oregon

223AI loads (75gr Amax and 65gr Gamekings)

Post by ACLakey »

I finally have my 1:9 twist .223AI back together and am looking at working up some loads with 75gr Amax and 65gr Gamekings. I have the following powders on hand H335, Varget, H4895, TAC, RL15, RL17 I hear good things about RL15 and the 75gr Amax, just looking for a good starting point. Thanks.
User avatar
ACLakey
Senior Member
Posts: 108
Joined: Thu Dec 27, 2007 7:06 pm
.204 Ruger Guns: Savage .204 Predator Hunter(soon)
Location: So. Oregon

Re: 223AI loads (75gr Amax and 65gr Gamekings)

Post by ACLakey »

Here are the results of the first round of loads. I did not have any pressure signs with any of these and will do a little adjusting before next time.

Temp 38-43 rain light to heavy


Image

Image

Image

Image

It seemed like Varget was the better powder today but I have more work to do.
User avatar
ACLakey
Senior Member
Posts: 108
Joined: Thu Dec 27, 2007 7:06 pm
.204 Ruger Guns: Savage .204 Predator Hunter(soon)
Location: So. Oregon

Re: 223AI loads (75gr Amax and 65gr Gamekings)

Post by ACLakey »

Well, I made it back to the range today and despite the cold and heavy snow I am pleased with the results. It seems I found my load.

Image

Image

The crono in the snow was a no go so I will have to get some more data next trip.
User avatar
ACLakey
Senior Member
Posts: 108
Joined: Thu Dec 27, 2007 7:06 pm
.204 Ruger Guns: Savage .204 Predator Hunter(soon)
Location: So. Oregon

Re: 223AI loads (75gr Amax and 65gr Gamekings)

Post by ACLakey »

I worked up some loads with H335 and the results are as follows.

30F cloudy, still
223AI 75gr Amax CCI 450

Image

It really liked 25.1gr at .005 off the lands(the sweet spot for these bullets in my rifle) This five shot group is what I like to see. :) I now have three loads with same hole groups (RL15, Varget and now H335) I need to get a new chrono and shoot them to see what one to go with. I know I should be working them up over a chrono but mine took a dump and christmas kicked my butt.
User avatar
Song Dog
Senior Member
Posts: 505
Joined: Fri Apr 04, 2008 6:18 pm
.204 Ruger Guns: Savage 10, 12, & 16
Location: Palmyra, IL

Re: 223AI loads (75gr Amax and 65gr Gamekings)

Post by Song Dog »

NICE!
PREDATOR DYNAMICS (facebook)
Foxpro Western Dealer Rep.
God's Country Camouflage-Fieldstaff
"A man with an experience has volumes more than a man with a theory"
User avatar
ACLakey
Senior Member
Posts: 108
Joined: Thu Dec 27, 2007 7:06 pm
.204 Ruger Guns: Savage .204 Predator Hunter(soon)
Location: So. Oregon

Re: 223AI loads (75gr Amax and 65gr Gamekings)

Post by ACLakey »

I ran several loads over the chrono with 10 shot strings this weekend.

22" 1:9 Stock Savage barrel rechambered.
COL wih 75gr Amax 2.460"
CCI 450 primers
Win or WCC case (neck sized)

26.2gr RL15
Vel = 3000 average
SD = 27.67
ES = 71
.75" 10 shot group

26.4gr RL15
Vel = 3025 ave
SD = 14.2
ES = 33
Gave the best velocity an the most consistant 10 shot group. 7 shots in a ragged hole and three fliers about 1/2" off, could have been me and the numb fingers from the cold. I am going to use this load for my long range experimentation and recheck this summer.

25.2gr H335
Vel = 2950 ave
SD = 47.15
ES = 128
This was a very accurate group during load development. With the cold -2F temperatures it was all over the place.

25.4gr H335
Vel = 2995 ave
SD = 26.44
ES = 60
Shot well, 6 in a ragged hole and 4 within a .65" circle.
hemiallen
Senior Member
Posts: 190
Joined: Sat Oct 31, 2009 3:59 pm
.204 Ruger Guns: Rem 204r, 20vt one Sako-one Cooper, 17FB 17HH, 17JAVALENA

Re: 223AI loads (75gr Amax and 65gr Gamekings)

Post by hemiallen »

Great thread, thanks for sharing.


I thought the rule was the 75 Amax needed a 1:8, curious if the added velocity of the AI allows the heavier bullets. I have a colt upper in 1:9, hoping to single load it heavy and hope the 75's will work in a std 223.


Allen
Post Reply