Search found 5 matches

by Vpees
Tue Mar 17, 2015 12:21 am
Forum: 204 Ruger Forum
Topic: Damaged Crown
Replies: 13
Views: 1290

Re: Damaged Crown

Yes,
I have been told that the Lee dies are good due to neck sizing only as there is no button to expand on the up stroke ... Less metal fatigue /potentail for splitting ...
Need to get onto those magpies at 250/300 yards plus, challenge is flat land and no cover :mad:
Cheers
Vp
by Vpees
Mon Mar 16, 2015 5:07 pm
Forum: 204 Ruger Forum
Topic: Damaged Crown
Replies: 13
Views: 1290

Re: Damaged Crown

Good news!!! Got some Slip 2000 Copper cutter and cleaned and cleaned and cleaned ... Bore is now clean! Hornady grouping 2/3" and Winchester 3/4" @ 100 yards using bypod and rear sandbag. Still a bit of wind from 160 deg so I'm sure there is room for improvement . Of note the Hornsby bras...
by Vpees
Wed Mar 11, 2015 11:54 am
Forum: 204 Ruger Forum
Topic: Damaged Crown
Replies: 13
Views: 1290

Re: Damaged Crown

Thanks, and all good points ... Rifle is a Savage Moddel 12 Varmint Low Profile with laminated wooden stock and fully floated stainless steel fluted bull barrel with box magazine. We shoot at 300, 500 & 600 yrds each Saturday when possible and I use a Harris bipod and rear sand bag (prone positi...
by Vpees
Tue Mar 10, 2015 12:09 am
Forum: 204 Ruger Forum
Topic: Damaged Crown
Replies: 13
Views: 1290

Re: Damaged Crown

Thanks guys ... I took it to the gun smith and he said it look fine and the spread I was getting was more likely due to shooting in the rain ... Warm barrel and the rain cools to top half causing a very small bend causing vertical stringing .... I had an empty case and a 40 grn projectile and he tes...
by Vpees
Sun Mar 08, 2015 12:08 pm
Forum: 204 Ruger Forum
Topic: Damaged Crown
Replies: 13
Views: 1290

Damaged Crown

Hi guys, I'm new to the site and have just got a second hand Savage Mod 12 in 204. Closer inspection of what looked to be a recrown shows no bevel or chamfer from the face of the 90 deg recess to the lands. Looking on line this should be 60 deg and about 20 to 30 thou. I took it to the range and the...