SmallCaliberCentral

Been callen coyotes for 4 years now with good sucsess. I mainly use destress calls but find myself useing more and more howls. It seems that there are times when I have used steady destress with no luck and then throw in an interigation howl sometimes I hear them and sometimes they even show up. I w...

Time to start reloading. I have a rem sps in 204 and it never shot factory ammo sub moa. after reloading my gun will group sub .5 moa It will take some time to find the right combo of bullet powder and primer but when you do it is hard to beat

how much benchmark? what COAL?

finnaly got my 32gn load dialed for my rem SPS . 32 bk 26.5 benchmark neck size sorted hornady brass COAL 2.350 cci BR4 5 shot group .468 not bad Also tried some 39 bk's @ 25 and 25.5 gn benchmark. Groups not so good 2" not shure if I will have to back off this load or change powder to get the ...

I decided to experiment with the factory stock I bought some krylon fusion paint and put a sweet snow camo pattern to it . Looks awsome i will post some pics once i figure out how.

Thinking about replaceing the factory rem SPS var stock with somthing aftermarket. Any suggestions? looking for a synthetic with a vertical grip availbilty in Canada is crappy. Also is anyone out there bedding the factory stock with good results?

Anyone reloading 200 accubond in 300 win mag with Re22 or H1000? My COAL is limited to the lenghth of the mag which puts the ogive .143 from the lands. wondering how picky the accubond is on seating depth?

Well after five years of hunting dutch creek I filled my first general elk tag. 7:40 pm glassing the far gidges a lone bull slips out of the woods to graze. my cosin spots the bull across the the valley and I put up the range finder 568 yards. With dark aproching fast no time to stock I doped the wi...

Hey Guys just wondering if anybody is shooting a Rem SPS var in 204? If so what kind of accuracy is it capeable of? Does anyone have experince glass bedding the foctory stock and free floating the barrel?

I live in Alberta and do most of my coyote calling nov-feb the temp is 0 to-30c .
thinking about getting out soon during the warmer weather. How should I adapt my setup to compensate for differnt temp and season?

So I decided to take 100 pices of once fired ,necksized, trimed, unprimed brass and though them on a scale. 80% of them ,I was able to sort into two lots within .7 of a grain. As for the outher 20% they were way out on both sides of my range. Some by as much as 7.7 grains. During previos range time ...

Thanks for the tips guys always looking for evey angle when fine tuneing a load.I Have not yet found a flash hole debur tool yet. Are they worth the purchace ?

Hey anybody out there weigh there brass?
I use hornady once fired factory brass in my reloads what is the max variation in case weight I should allow

I have measured the chamber length a 2.409 and the max COAL I was useing was 2.350 so with 0.059 distance from the lands I did not reduce the load yet. I would like to retest as it supports the volocity I would like to achive (4000 range) If this load does not prove acurate I will reduce.

where is north Ga? have you tried downloading your foxpro yet? what is your goto sound?