SmallCaliberCentral

use a .17 brass end on you cleaning rod .i use this with round 1 1/2 patchs

using 39 SBK's and 26.5 gr of rl10x fills it just about right .2.300 oal 1.938 ogive

39 SBK's and 26.5 gn rl10x works fine for me

tryed some more reloader 10x to see how much i could push the 39gn blitzking .went up to 27gn of rl10x,39gn bullet was doing over 4,000 fps but i had pressure signs on the primers (raised ) and after looking on quickload i thought better off not trying this much powder again and am now sticking with...

i did have a try with the 40 vmax got all the way up to 26.0gn of rl10x and i could of still gone more but i gave it up as a bad job and tryed the 39gn blitzkings ..i have some more 39gn loaded up to see how far i can push this 39gn bullet going up in 0.3 of a grain will post back in how i get on .....

here you go

39gn blitzking
rl10x powder 25.1gn
Primer: cci br4
ogive 1.938


shot at 105 mtrs



here it is again in real size

i have and use one for my .204 ..i just whish i had others for my other rifles ..if you neck turn you need one that you can bush ...money well spent

i trim mine to 1.840 every time i reload .yes they do stretch not all but some but i still check them all .if your going for top notch ammo .case prep is the only way to go ..

0.012" for me any more would just be to much .224 neck die used

i neck turn mine down to 12thou and end up useing a .224 redding neck bush ..it sounds to me you are useing wire wool on the necks .and takeing some of he brass of with out you knowing it ..go out and buy the next two bush sizes down .226 and .225

heres my load that shoots very well indeed .give it a try ..did go to 27gr of reloader 10x and shot well but best be safe and save on the barrel i backed it off a .5 of a grain Rifle: Rem 700 VLS 22"barrel Scope: nsx 8-32x56 Case: remmington Primer: cci br4 Powder: Reloader 10X, 26.5 grains Bul...

H-4831SC is what i use and cant fault it

nice shooting

reloader 10x is cacking powder for the .204 ..if i was you have a look at your primers and keep checking for the pressure signs as you add more powder ,if no signs of pressure, add a little more powder .3 of a grain once you look like your hitting the max load ..your groups will tighten up .them lit...

read on http://www.jamescalhoon.com/primers_and_pressure.php any body tride reloader 10x powder ..i use 27grn rl 10x topped off with a 32grn blitzking and thats a hot load 26.3grn is about top in most rifles ...i use cci br4