Search found 26 matches

by cynergyguy
Wed Apr 15, 2009 9:23 am
Forum: 204 Ruger Forum
Topic: The Perfect 100yrd Targets
Replies: 12
Views: 1191

Re: The Perfect 100yrd Targets

I bought some load development targets from sinclair international a few years back and they seem to work great, they have holes punched in them to put in a three ring binder and a place to write all the info. I have also downloaded some targets from mytargets.com
by cynergyguy
Sat Apr 11, 2009 8:30 pm
Forum: Hunting with the 204 Ruger
Topic: Soliciting opinions....
Replies: 24
Views: 2669

Re: Soliciting opinions....

I believe I would choose either a 22-250 or a .223 for many reasons but mainly because they work, ammo is available everywhere, componets are readily available for reloading and both are very accurate. I know some of the guys on here love wildcats and recommend them often, but until you have alot mo...
by cynergyguy
Sun Apr 05, 2009 10:16 am
Forum: 204 Ruger Forum
Topic: not 204 but it goes bang
Replies: 5
Views: 621

Re: not 204 but it goes bang

Hey cracker, I had the same problem with my VTR in .223 until I got a couple hundred rounds through it. It has settled down quite nicely and am very happy with it. It will shoot 5 rounds in a ragged hole at 100 yds. I don't know if yours is broke in yet But make sure you keep the copper out of it an...
by cynergyguy
Sat Apr 04, 2009 7:07 am
Forum: 204 Ruger Forum
Topic: Small rifle Primers
Replies: 7
Views: 763

Re: Small rifle Primers

Here in Florida I have only found them at gun shows, But there is one gun shop that has lots of Federal 205m Dows arms room in Dade city but he is wanting 50.00 a thousand or 250 per case, I bought a case of Rem 7 1/2 recently at a show for 140.00. Good luck!
by cynergyguy
Wed Mar 25, 2009 3:41 pm
Forum: Centerfire Rifles
Topic: search is over
Replies: 10
Views: 1264

search is over

Finally after many trips to the range(at least 20) with my LRPV in 204 I finally found something it likes, 39 blitzkings and re-10x 5 shots and a one hole group. I was just about to give up on the 204 and order a barrel in 222, I guess one should never give up but the 204 is the hardest cartrige I h...
by cynergyguy
Mon Mar 23, 2009 2:36 pm
Forum: 204 Ruger Forum
Topic: Help to pick a factory .204
Replies: 15
Views: 1520

Re: Help to pick a factory .204

If you have a chance to check out the remington VTR, its worth a look, priced right, weighs about 7 1/2 pounds, and is capable of one hole accuracy with the right load development. I have one and its a great gun to carry on walkabout, mine is a .223 but they make it in 204R 22-250 and 308. I also ow...
by cynergyguy
Tue Mar 17, 2009 4:22 pm
Forum: 204 Ruger Forum
Topic: Help Picking A SAVAGE
Replies: 13
Views: 1273

Re: Help Picking A SAVAGE

I currently have 3 savages 1. LRPV 204r 2. LRPV 22-250 3. model12 bvss 223, IMHO for what you pay savage makes a great rifle, all shoot very well and with proper load development they will shoot sub 1/2 moa with no problem. I have owned most of the other factory guns including remmy's and winnies br...
by cynergyguy
Sun Mar 01, 2009 1:06 pm
Forum: 204 Ruger Forum
Topic: advice on Thompson Encore
Replies: 3
Views: 467

Re: advice on Thompson Encore

Steve, I too have the pro-hunter in 22-250 with a simmons whitetail classic 6.5x20 mil-dot and at 100 yds it will put 5 bullets inside a 1 inch circle with a 55g v-max bullet and 34g of varget, I really haven't played around with it much but plan to in the future.
by cynergyguy
Fri Feb 27, 2009 9:49 pm
Forum: Optics
Topic: reticle change ?
Replies: 7
Views: 696

Re: reticle change ?

Thanks Jim, I will check it out.
by cynergyguy
Fri Feb 27, 2009 4:25 pm
Forum: Reloading the 204 Ruger
Topic: How many grains make a diff?
Replies: 17
Views: 1140

Re: How many grains make a diff?

Most of the time berger recommends seating the bullets touching the lands, so they back off the powder charge, they don't want you to create too much pressure, just start low and work your way up looking for pressure signs and you should be fine.
by cynergyguy
Fri Feb 27, 2009 4:18 pm
Forum: Optics
Topic: reticle change ?
Replies: 7
Views: 696

Re: reticle change ?

I didn't know they would do a trade, How does that work exactly? I am not sure were they are located but will they do it over the phone ? Over the net ?
by cynergyguy
Fri Feb 27, 2009 10:06 am
Forum: Optics
Topic: reticle change ?
Replies: 7
Views: 696

Re: reticle change ?

I have decided to sell this scope, as I said before it is a 6.5 x 20 vxlll long range side focus with fine cross hairs, anyone interested? make me an offer, it is like new not a scratch. I am wanting to sell it to fund another project.
by cynergyguy
Thu Feb 26, 2009 6:59 am
Forum: Centerfire Rifles
Topic: Need a new rifle
Replies: 17
Views: 2011

Re: Need a new rifle

Update I looked on the savage forum and there are 4 of these rifles available for 645.00 all new and unfired, also he has the 243 for 665.00 .I believe these guns fit the requirements you need.
by cynergyguy
Thu Feb 26, 2009 6:42 am
Forum: Centerfire Rifles
Topic: Need a new rifle
Replies: 17
Views: 2011

Re: Need a new rifle

Get on the Savage shooters forum and look at Northlander Shooters supply they are an advertiser there and has a few new model 12 vlp in 25-06 at a very good price mid 600.00 range if I remember right, I believe savage has dicontinued that caliber in the mod 12 vlp but Jim has them and will ship to y...
by cynergyguy
Wed Feb 25, 2009 6:30 am
Forum: Rimfire
Topic: help me decide
Replies: 13
Views: 2368

Re: help me decide

I want to spend as little as possible but I do want a quality product. I would like to buy a bolt gun to practice at the range.